Only the first 1024 bytes of the GSD file are displayed within the preview.

#Profibus_DP

GSD_Revision        = 1

;========================= PRODUCT SPECIFICATIONS =====================

Vendor_Name         = "PROCENTEC"
Model_Name          = "JK16IDP"
OrderNumber         = "JK16IDP"
Ident_Number        = 0x696A
Revision            = "Rev. 1.0"
Hardware_Release    = "Rev. 1.0"
Software_Release    = "Rev. 1.0"
;========================= OVERALL PROFIBUS SPECIFICATIONS ============

FMS_supp            = 0
Protocol_Ident      = 0
Station_Type        = 0
Slave_Family        = 0

;========================= HARDWARE CONFIGURATION =====================

Implementation_type = "LSPM2"
Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 0

;========================= PROTOCOL CONFIGURATION =====================

Set_Slave_Add_supp  = 1
Auto_Baud_supp      = 1
Min_Slave_Intervall = 1
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 0
Fail_Safe           = 0

;========================= SUPPORTED BAUDRATES ========================

9.6_supp

Only the first 1024 bytes of the GSD file are displayed within the preview.